最近我朋友家里办了这个 所以我特别以这个说明一下操作设置教程！
Make sure your starter kit contains the following items:
以这个为例子
Efficient Networks Speedstream 6520 modem
USB or RJ-45 Ethernet cable (used to connect the modem to your computer)
RJ-11 telephone cable (used to connect the modem to the wall jack)
Power adapter
Connecting your modem
Ethernet connection (recommended)
Plug one end of the RJ-11 telephone cable into an unfiltered telephone wall jack (enabled for Sympatico High Speed Internet service).
Plug the other end of the RJ-11 telephone cable into the DSL port on the back of the modem.
Plug one end of the RJ-45 Ethernet cable into your computer’s Ethernet port.
Plug the other end of the RJ-45 Ethernet cable into the Ethernet port on the back of the modem.
Insert the rounded end of the power adapter into the Power port and the dual-pronged plug end into your power outlet.
Press the power button to turn on the modem.
USB connection
Plug one end of the RJ-11 telephone cable into an unfiltered telephone wall jack (enabled for Sympatico High Speed Internet service).
Plug the other end of the RJ-11 telephone cable into the DSL port on the back of the modem.
Plug the small, square end of the USB cable into your computer’s USB port.
Plug the wide, flat end of the USB cable into the USB port on the back of the modem.
Insert the rounded end of the power adapter into the Power port and the dual-pronged plug end into your power outlet.
After you turn on your modem, you should see a few lights blinking. How can you tell you’re connected to the Internet? Simply by looking at the lights…
Ethernet connection
Power on – Power light is green
Modem connected to the Sympatico network – DSL light is green
Modem and computer connected over Ethernet – Ethernet light is green
Wireless connection is active – Wireless light is green
Internet connection has been established – Internet light is green
USB connection
Power on – Power light is green
Modem connected to the Sympatico network – DSL light is green
Modem and computer connected over USB – USB light is green
Wireless connection is active – Wireless light is green
Internet connection has been established – Internet light is green
Having problems with your Internet connection? Restart your modem.
To restart your modem, turn it off for 30 seconds, then turn it back on.
If you have a home networking router that connects your computers to each other, turn it off after your modem powers down. Wait until your modem has restarted before turning your router back on.
Even if you’re not having any problems with your Internet connection, you should still follow the steps above. Restart your modem (and your router, if you have one) at least once a month (for maintenance purposes).
Resetting your modem to factory settings.
The Reset to Factory Defaults option should be used when you find it necessary to recover the factory default settings. This may be necessary when a custom configuration did not go as planned, when a new configuration is desired, or when the wireless home networking modem does not appear to be working properly.
Important: This option resets all personalized settings on your modem.
To use the Reset option:
Open your Web browser.
Type http://192.168.2.1 in the address bar, then press the Enter key.
Click on the Basic Setup tab.
Select “How do I restart my home networking modem or it back to the original factory settings?”. This option takes you to the System Reboot screen.
Check the Reset to Factory Defaults box.
Click Reboot.
The system responds with a warning screen that prompts you to confirm the Reset to Factory Defaults selection.
Click the Reset to Factory Defaults button to confirm, or click Cancel to return to the System Reboot screen.
A status screen begins a 45 second countdown to reset the modem.
Download the Efficient Networks Speedstream 6520 manual
Download Efficient5200_4.2.2.122.exe (the driver for this modem)
Press the power button to turn on the modem. |
设置 Speedstream 6520 Modem
